BTPFZ - X-TEND INJECTION SYSTEM POWER PURGE

  • MSDS: BTPFZ
  • Manufacturer: WYNN OIL CO
  • Product Name: X-TEND INJECTION SYSTEM POWER PURGE
  • National Stock Number: 9150-00F035941
Product Identification

Product ID:X-TEND INJECTION SYSTEM POWER PURGE
MSDS Date:11/27/1989
FSC:9150
NIIN:00F035941
MSDS Number: BTPFZ

Responsible Party
WYNN OIL CO
1151 W 5TH
AZUSA, CA 91702-3314
US

Emergency Phone: 818-334-0231

Info Phone: 818-334-0231

Preparer: LES LUGOSI

Cage: 15121

Contractor
WYNN OIL CO
AZUSA, CA 91702-3314 US

Cage: 15121

Ingredients

ETHYL ACETATE

CAS: 141-78-6

RTECS: AH5425000

Fraction By Weight: 5.0%

OSHA PEL 1400 MG/CUM

ACGIH TLV: 1400 MG/CUM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


DIACETONE ALCOHOL

CAS: 123-42-2

RTECS: SA9100000

Fraction By Weight: 2.0%

OSHA PEL 240 MG/CUM

ACGIH TLV: 238 MG/CUM


ISOPROPANOL (ISOPROPYL ALCOHOL), 2-PROPANOL, DIMETHYL

CAS: 67-63-0

RTECS: NT8050000

Fraction By Weight: 5.0%

OSHA PEL 400 PPM

ACGIH TLV: 400 PPM


2-BUTOXYETHANOL (ETHYLENEGLYCOL MONOBUTYL ETHER), BUTYL

CAS: 111-76-2

RTECS: KJ8575000

Fraction By Weight: 2.0%

OSHA PEL 50 PPM (SKIN)

ACGIH TLV: 25 PPM (SKIN)


XYLENE, DIMETHYLBENZENE, XYLOL

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 75.0%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM, SKIN

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INGESTION: NOSE/THROAT/GI TRACT
IRRITATION. SKIN: ABSORPTION, IRRITATION. EYES: IRRITATION.
INHALATION: ANESTHETIC, IRRITANT TO RESPIRATORY TRACT.
REPEATED/PROLONGED EXPOSURE TO SOLVENT MAY CAUSE PERM ANENT BRAIN,
NERVOUS SYSTEM, LIVER/KIDNEY DAMAGE.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, VOMITING, DIZZINESS, NAUSEA,
NARCOSIS, REDNESS, DEFATTING, BLURRED VISION, LIGHT-HEADEDNESS,
DIFFICULTY BREATHING

First Aid

First Aid:INGESTION: DON'T INDUCE VOMITING. SKIN: WASH W/SOAP & WATER.
INHALATION: REMOVE TO FRESH AIR. GIVE OXYGEN. EYES: FLUSH W/CLEAN
WATER FOR 15 MINS. OBTAIN MEDICAL ATTENTION IN ALL CASES. NOTE TO
PHYSICI AN: THE PRODUCT HAS A LOW ORDER OF ACUTE ORAL/DERMAL
TOXICITY, BUT MINUTE AMOUNTS ASPIRATED INTO THE LUNGS DURING
INGESTION MAY CAUSE MILD TO SEVERE PULMONARY INJURY.

Fire Fighting

Flash Point Method:PMCC
Flash Point:57F
Extinguishing Media:WATER FOG, DRY CHEMICALS, CO2.
Fire Fighting Procedures:USE WATER TO COOL FIRE EXPOSED CONTAINERS.
WEAR A SELF-CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:OUTER CONTAINER COULD RUPTURE FROM
PRESSURIZATION DUE TO HEAT.

Accidental Release

Spill Release Procedures:ELIMINATE SOURCES OF IGNITION. USE ABSORBENT
SWEEPING COMPOUND TO SOAK UP MATERIAL. SHOVEL INTO CONTAINERS
W/NON-SPARKING TOOLS. REMOVE OUT OF DOORS.

Handling

Handling and Storage Precautions:AVOID BREATHING OF VAPORS & CONTACT
W/SKIN & EYES. STORE IN COOL DRY PLACE. DON'T SPRAY NEAR
HEAT/FLAME. DON'T PUNCTURE/INCINERATE.
Other Precautions:DANGER: EXTREMELY FLAMMABLE. HARMFUL/FATAL IF
SWALLOWED. KEEP OUT OF REACH OF CHILDREN.

Exposure Controls

Respiratory Protection:A SCBA IF TLV LIMITS ARE EXCEEDED.
Ventilation:LOCAL EXHAUST TO CONTROL VAPORS IN CLOSED AREAS. MECHANICAL
FANS ALSO ACCEPTABLE.
Protective Gloves:SOLVENT RESISTANT
Eye Protection:SAFETY GLASSES W/SIDE SHIELD
Other Protective Equipment:EYE WASH STATION.
Work Hygienic Practices:REMOVE CONTAMINATED CLOTHING & LAUNDER BEFORE
REUSE.
Supplemental Safety and Health

Chemical Properties

Boiling Pt:B.P. Text:169-342F
Vapor Pres:9.5
Vapor Density:4.0
Spec Gravity:0.9
Solubility in Water:10%
Appearance and Odor:CLEAR, AMBER LIQUID W/AROMATIC ODOR.
Percent Volatiles by Volume:89

Stability

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:TEMPERATURES ABOVE 120F, HEAT
Hazardous Decomposition Products:OXIDES OF CARBON, NITROGEN
Conditions to Avoid Polymerization:HEAT

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE &
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.